Since 1996, Enduro Bearings has worked closely with frame, fork and component manufacturers in the bicycle industry to ensure we provide the best bearing or seal for every application. Successful collaboration with component fabricators has helped Enduro Bearings develop the unique design features.
Manufacturer and Supplier of Premium Bearings and Related Products for Bikes and Industry.
- Mast Guide Bearings
Enduro Mast Guide Bearings or Mast Roller Bearings act as guide roller for the telescopic mast in forklifts and similar heavy machinery. We can supply Mast Guide Bearings for nearly every brand of forklift or mast lift truck.
The bores of mast guide bearings are fitted, as with any standard industrial bearing. Unlike typical industrial bearings however, the outer diameter of a mast guide bearing acts directly against a steel mast rail.
Depending upon the design of the mast and fork carriage assembly, mast guide bearings can be subject to very high radial and thrust loads, as well as high intermittent shock loads.
Mast guide bearings are intended for low speed, high load applications. Tight seals and high fill grease (typically >90%) are used to ensure minimal wear and tear and the longest possible lifespan for your components. Resulting in minimal down time for your machinery.
The internal design (ball and roller complements) maximizes the load capacity.
- Enduro Radial Ball Bearing
These Standard ball bearings or Custom sizes available and low minimum orders Substantial price savings over OEM parts
- MR series outer race/roller assemblies
These are designed to mount into the customer supplied housing, and are available in a wide range of inch and metric sizes.
All MR series bearings incorporate oil holes and grooves for lubrication systems that are designed as part of the housing.
MR series bearings are available with or without integral seals.
Specifications for various interference fits used when sizing the housings are available on request.
MR series roller assemblies can either run directly on the customer supplied shaft, or on Enduro MI series inner rings
When running directly on the shaft, please contact Enduro for shaft specifications regarding material, hardness, finish, and tolerance.
- MI series inner rings
Designed to work with both MR series outer races, as well as SRF series track rollers.The advantage that MI series rings offers is that when the bearing is worn, only the inner ring, rather than the entire shaft, needs to re replaced.
Also the wide range of sizes allows for flexibility of design; the same inner ring can be combined with various outer race/roller assemblies, and vice versa.
All MI series inner rings incorporate oil holes and grooves for lubrication systems that are designed as part of the shaft.
- Track Roller Types
Cam followers and Yoke roller (CF, CFE, CFH, CYR, KR, NUTR, and SRF) are all track roller types. Outer races of these bearings run directly on a track or other wear surface. Bearings are not designed to be pressed into a housing.
Cam follower types (CF, CFE, CFH, KR) do incorporate re-lubrication features into the integral shaft.
Cam followers and yoke rollers are used in a wide range of industries: material handing and conveying, industrial trucks, food processing, textiles and general machinery.
2. Spherical Plain Bearings (or bushings) find a very wide range of uses in the following industries:
- Heavy Equipment – Earth moving equipment etc.
- Material Handing – Forklifts, Loaders, Telehandlers.
- Logging Machinery – All types
- Mining Industry – All types of trailers and shuttle equipment.
- Ultra heavy duty off road vehicles.
- Hydraulic Industry – Cylinder and piston ends.
- Wind generating machinery.
- Printing Machinery